[edit] 1 Edirol R09 Solid State Recorder - Audio Recording Tutorial
[edit] 2 Before You Start:
Make sure that you have all the equipment you need. The R09 kit includes:
- Edirol R09 Audio Recorder (including 1.0GB memory card, power cable and adaptor).
- Headphones
- Set of Radio Microphones (receiver and transmitter, with clip mic, windshield, clip and cable).
- Mini R09 tripod
- Audio recorder cover.
- USB cable
The R09 audio recorder has mains power however, can be powered with 2 x AA batteries. The radio mics are battery powered as well and need 2 x AA batteries for each the receiver and transmitter. Remaining battery life is displayed on the main screen in the bottom right hand corner of the screen. The radio mics also display the remaining battery life on the bottom left hand corner of the screen.
[edit] 3 Setting Up
[edit] 3.1 Audio Recorder
Firstly lay the recorder on a flat surface in front of you and near to a mains socket if you are not using batteries.
On the bottom of the RO9 is where the memory card, batteries and USB cable input are situated. Slide the flap down and lift up to insert the memory card in the slot at the top of the compartment. The batteries can be inserted and the + and - signs above the batteries show you in which direction to place the batteries.
http://www.sciencemedianetwork.org/images/ext/audio_tutorials/R09-1.jpeg
http://www.sciencemedianetwork.org/images/ext/audio_tutorials/R09-2.jpeg
When connecting to mains power open the flap saying "DC IN" on the left hand side of the recorder and connect the power adaptor into the input.
http://www.sciencemedianetwork.org/images/ext/audio_tutorials/R09-3.jpeg
With a new memory card you will need to format the "SD memory card". To do this you need to go into the menu by pressing the menu button. Scroll down the options using the "down arrow/stop" button until you reach SD card (7th menu option). To select this option push record, then select Format > Yes. This will automatically start formatting the memory card and a "Now Processing" screen will come up with a loading bar underneath.
http://www.sciencemedianetwork.org/images/ext/audio_tutorials/R09-4.jpeg
http://www.sciencemedianetwork.org/images/ext/audio_tutorials/R09-5.jpeg e http://www.sciencemedianetwork.org/images/ext/audio_tutorials/R09-6.jpeg
When using the radio mics with the RO9, connect the mini jack > mini jack cable into both the receiver and the top of the RO9 into the "MIC" slot.
http://www.sciencemedianetwork.org/images/ext/audio_tutorials/R09-7.jpeg
[edit] 3.2 Transmitter
If the mic is not already attached, attach the clip microphone to the transmitter: The mic plugs in at the top, and there is a screw to secure it. Turn both the transmitter and receiver on by pressing the on/off button, which is situated underneath the flap for the battery compartment. The flap lifts by squeezing either side to release it.
Have a look at the picture above, and do this check:
- On both transmitter and receiver: Has the display lit up, and are both powerlights showing?
- On the receiver the RF light (green) should be on and and the upper black bar on the screen should be on full (indicating full radio reception).
- When you talk into the mic do the level indicators (on both the transmitter and receiver) flicker?
- Now mute the transmitter and look at the receiver: Has the "radio reception bar" fallen to zero? If not, change frequency (see the trouble shooting below).
There are usually several stages that control audio levels and two of those stages are on the radio mic set.
- The mic/transmitter has a sensitivity setting. Locate the sensitiy setting in the menu, and explore different settings. With the sensitivity set to say -6dB, you will find it quite easy to distort mic signal (the yellow led on the front will flash). A good, conservative setting is -20dB.
- The receiver has the 'AF out' setting, which determines the power delivered to the recorder. This can range from -12dB (mic level) to +12dB (line level). Again you should explore this and see how it affects the input stage of the recorder (see below). Many recording devices expect a mic level, so it is safer to set the 'AF out' level to -12dB (mic level).
[edit] 3.3 Switching it on and testing sound quality
Do test well in advance of the lecture: You can use the recorder, and a colleague wears the microphone.
Switch on the audio recorder by pressing the "power on/off" button on the left side of the recorder.
Depending on how long you will be recording for determines which recording setting you should use either mp3 of wav format. Wav format is the better quality and where ever possible you should be recording in 44.1kHz > 16 bit Wav format. However this will only allow you approx. 88 mins of recording time. Alternatively you can record in mp3 format. Either in mp3 128 kbps through to 320 kbps. The higher the kbps the better quality the sound recording will be but the less amount of recording time available on the memory card. 128kbps allows you 980 mins of recording time and 320kbps allows you 392 mins. This is for a 1GB Memory card. The timings will vary on the size of the memory card, the bigger the card the longer amount of recording time.
To alter your settings selct "MENU > RECORDER SETUP" You then have the options to change the sample rate and record mode. To alter the settings use the "UP/PLAY and DOWN/STOP" controls to scroll through the options and to select an option press "REC".
http://www.sciencemedianetwork.org/images/ext/audio_tutorials/R09-8.jpeg
Switch on both radio mics by the little on/off buttons. (These are under the battery-compartment flaps; you have to squeeze side of mic to release them.) Check that there are 2 lights on the receiver and that the upper black bar on the screen is full (for radio reception)
http://www.sciencemedianetwork.org/images/ext/audio_tutorials/R09-9.jpeg
Now test whether sound is coming through. The scale on the radio mic transmitter screen should be showing some activity. The scale on the radio mic receiver screen should be showing some activity. Press "REC" once to put recorder on stand-by. The light surrounding the "REC" button will be flashing. The scales on the screen of the recorder should be showing some activity.
The RO9 recorder has its own mic too, and (despite the settings above) you need to double check that you're recording from the radio mic. To do this, tap or scratch the radio mic gently. You should hear this sound in the headphones. Then tap or scratch the RO9's mic gently: You should not hear anything in the headphones. The RO9 mics are on the top of the recorder on each side.
If you can hear things in the audio that shouldn't be there (e.g. somebody else talking) or a lot of interference (crackling on zinging noises), you may need to change the channel on which the audio is transmitted. Do this test: Earlier you checked that there are 2 lights on the receiver and that the upper black bar on the screen is full. Now turn off the transmitter. Is the green light on the receiver still on? The upper black bar should not be full, but it might show some activity. If so, then you have somebody else using a similar frequency, and you call Bjoern to ask how to change the frequency.
[edit] 4 Giving the speaker the microphone:
Ideally you want to do this at least 15 minutes before the lecture starts. Connect the clip microphone to the speaker in a way so that the mic "comes cleanly off the clothes", i.e. such that the mic does not rub against the clothing. Make sure that there is not a name tag, long hair, or jewelry that "clunks" against the mic.
When putting the mic on the speaker the best place is on the tie. Otherwise on the lapel of a jacket, or onto the shirt. A third of the way down the shirt is a good position. Make sure that the mic clip is firmly attached but that the mic itself comes away from the clothing: sometimes (with movement) it can fall back against the clothing.
The transmitter that should be placed safely out of the way. Either the trouser pocket or belt are both good positions. If your speaker is well animated make sure the transmitter will not come loose. Make sure the antenna can hang freely, and is not about to be snapped off.
Ask your speaker to carry on talking, bearing in mind that they may speak more loudly during the talk. This allows you to listen through the headphones and watch the levels on both the receiver and recorder. Monitor the audio carefully and pay attention to any peaks in the sound. Be aware that if the speaker is going to be giving a lecture but they are speaking at a normal level before, they will adjust their own personal voice levels when it comes to the lecture.
[edit] 5 Checking quality and adjusting audio level
Listen to speaker's voice through headphones to assess the quality. Listen attentively, and listen 'around' what is being said. Does the voice sound nice and close to your ear, or is it a big roomy sound? Is there scratching from something? Are there noises from something banging against the mic?
You will have to adjust the audio level: To do this simply press the Input level controls on the left side of the recorder accordingly to whether you need to lower or raise the recording level. You will need to be in "REC" standby mode to see the levels and you need the levels to be set at 12 on the level indicator. This allows you 'head room' with the recording so that if there is an unexpected sound or raise in a person's voice the sound will not distort.
As the subject speaks or sound is being received you will need to make sure that on the screen the levels are set correctly and also you do not want the "PEAK" light to be coming on. This is situated just below the recorders screen.
http://www.sciencemedianetwork.org/images/ext/audio_tutorials/R09-12.jpeg
[edit] 6 Trouble shooting
- No sound. Make sure both the transmitter and the receiver are on the same wave length in order for them to be able to pick each other up. Check the 'sound chain':
- Is the level meter on the transmitter flickering when you speak into the mic? If not, check that it is turned on and not on mute and that the mic is properly connected.
- Is the level meter on the receiver flickering? If not, check radio reception.
- Is the level meter on the recorder flickering? If not, check the cables are connected properly.
- All of these are working, but you do not hear anything? Check the volume control for the headphones.
- Strange sounds / other people speaking.
- Do this test: try turning the transmitter off, if the green light on the receiver stays on and the black bar showing the radio reception is still full, someone nearby may be using the same frequency.
- If the wave length is already used (e.g. if you can hear other sounds, or the "radio reception bar" does not fall to zero when you turn of the transmitter), you need to change the frequency (on both transmitter and receiver). You must never have two microphones transmitting on the same frequency. (Two receivers receiving signals from the same microphone is, however, fine.)
Mobile phones on the person connected to the mic must be turned off otherwise they will interfere.
[edit] 7 Starting recording
You should now be ready to record the event. You have plenty of space on the memory card, so there is no harm in starting the recording 10 minutes early. From experience: It is a common problem to miss the start of the event and people may suddenly start to talk while you were not watching. So just start recording in good time.
If there is somebody introducing the speaker, record this as well (even if you you do not have a mic on them). You can always cut it later. (Imagine the disappointment: Did you catch the introduction by [famous person]? - Ah sorry, the recorder was not running.) Of course without a second mic the sound may not be usable but at least you have it.
As mentioned above: Give enough pre-record time before the activity happens as you want enough pre-roll for the edit and if you do a test recording previously you will also be confident that either the recorder is working fine or you have enough time to sort the problem out!
Remember: What you hear in the headphones is what you hear on the recording so continously check the audio for any outside sound, buzzing or feedback. If you are recording on location and have the ability to start recording again listen out for unwanted sounds that are out of your control, such as trains going past, dogs barking etc.
During the Recording: Whilst recording it is advisable to do some checks to make sure the recording is working properly:
- Is the record light on display of the recorder solid?
- Is the time display ticking forward?
- Are the level meters still running and showing activity?
- Does it sound good? Is it clean sound?
- Is there enough space on the memory card?
[edit] 8 Recording
Press "REC" once to put the recorder onto stand-by.
http://www.sciencemedianetwork.org/images/ext/audio_tutorials/R09-13.jpeg
When you are ready to begin, press 'Record'. (If you look at screen of
recorder, the timer will be running.) Make you press record in good
time.
http://www.sciencemedianetwork.org/images/ext/audio_tutorials/R09-14.jpeg
Remember: What you hear through the headphones is what you will hear on the tape, so check for buzzing, feedback etc.
Is better to have sensitivity of mike set to too low rather than too high. The "PEAK" light should never light up!
Volume control for the headphones is on the right side of the recorder (headphones only, not tape)
http://www.sciencemedianetwork.org/images/ext/audio_tutorials/R09-15.jpeg
During the recording: Once the rush of getting the recording and the
lecture started is out the way, do some simple checks:
- Is the record light on display of the recorder solid?
- Is the time shown on the display ticking forward?
- Are the level meters flickering on the front of the recorder?
- Does it sound good? (You'll need to listen attentively.)
- For long recordings (e.g. when recording all day): Is there enough space on the memory card?
[edit] 9 Stopping the recording:
Press 'stop' when you have finished.
[edit] 10 Playback
To hear your recording select the correct track from the "FINDER" menu (same button as menu, just tap the button) Scroll down the tracks using the "UP/DOWN" buttons then select using the "REC" > Select > "REC" Then you can press "PLAY" and your selected track will start to play.
[edit] 11 When you've finished recording…
Switch off the digital recorder and the 2 radio mikes, and disconnect everything.
Check through the equipment sheet included with the kit: Make sure you have everything you started with (including the mic windshield - a little metal cup on the clip-on mike.)
Putting away the microphone: Wrap up the wires loosely. Even if you received the mic like this: don't tie up the microphone wire with the mic clip itself, or try to secure the mic with the metal bracket on the back of this mic: This will damage the cable.
[edit] 12 When you're back home:
As soon as you can, copy memory stick onto computer, and burn to a CD/DVD for safe keeping.
To convert your recordings onto a computer using the USB cable, you need to connect a USB cable to both the recorder and your computer, the recorder will then automatically go into USB mode. You will then find the recorder mounted in either 'my computer' for a PC or in Finder for a MAC. You can then copy the tracks to your computer onto a file selected. Unmount the recorder by 'ejecting' the drive. You can then disconnect the recorder and turn it off.
http://www.sciencemedianetwork.org/images/ext/audio_tutorials/R09-16.jpeg
[edit] 13 License
This document is licensed under a Creative Commons Attribution-Noncommercial-Share Alike 3.0 Unported License. http://creativecommons.org/licenses/by-nc-sa/3.0/Creative. Please acknowledge Björn Haßler (http://www.sciencemedianetwork.org), Gail Pearson, and Andrew Taylor, as well as any additional authors on the ICT4E wiki. Original document written 29th November 2007.